LG WM6998 maintenance schedule and special situations.
LG WM6998 Model Report LG Laundry Error Codes
| Item | Interval | Owner Action |
|---|---|---|
| Care after Wash | After each use | After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. |
| Care after Wash | Not specified | Wipe the body of the washer with a dry cloth to remove any moisture. |
| Care after Wash | Not specified | Leave the door open to dry the drum interior. |
| Care after Wash | Not specified | Make sure children and pets do not climb into the drum. |
| Care after Wash | Not specified | Engage the Control Lock feature if needed to prevent children from accidentally starting a wash cycle. |
| Cleaning the Exterior | Not specified | Proper care of your washer can extend its life. |
| Cleaning the Exterior | Not specified | Door: Wash with a damp cloth on the outside and inside and then dry with a soft cloth. |
| Cleaning the Exterior | Not specified | Door Seal : Remove lint from the door seal using damp cloth. |
| Exterior: | As needed | Immediately wipe off any spills. |
| Exterior: | Not specified | Wipe with a damp cloth. |
| Exterior: | Not specified | Do not touch the surface or the display with sharp objects. |
| Filters and Condenser Cleaning | Not specified | Refer to the following instructions for proper cleaning of the filters. |
| Filters and Condenser Cleaning | Not specified | After cleaning the filters, insert it back into place. |
| Filters and Condenser Cleaning | Before each use | Always clean the lint filter before and after use. |
| Filters and Condenser Cleaning | After drying 10 times | Clean the inner filter after drying 10 times or when the lint has accumulated on the condenser filter. |
| Cleaning the Lint Filter | Not specified | Grip the external filter cover and pull it toward you to remove it. |
| Cleaning the Lint Filter | Not specified | Hold the filter assembly over a trash can and pull the handle on the front of the filter to slide the mesh filter off as shown. |
| Cleaning the Lint Filter | Not specified | Sliding off the filter automatically removes the lint. |
| Cleaning the Lint Filter | Not specified | To clean off any residual lint, use a vacuum cleaner or rinse the mesh filter under running water. |
| Cleaning the Lint Filter | Not specified | The filter must be completely dry before using or it could cause an unpleasant odor. |
| Cleaning the Lint Filter | Not specified | Do not tap the filter repeatedly as the built-in magnet may dislodge and cause a malfunction. |
| Cleaning the Lint Filter | Not specified | After drying the lint filter completely, reassemble it into the cover. |
| Cleaning the Lint Filter | Not specified | Align the two grooves on the filter and filter cover. |
| Cleaning the Lint Filter | Not specified | Push the mesh filter all the way onto the cover until it clicks into place. |
| Cleaning the Lint Filter | Not specified | Insert the filter assembly into the product. |
| Cleaning the Lint Filter | Not specified | Slide the back into place and lower the front of the filter to assemble. |
| Cleaning the Condenser Filter | Not specified | Grip the external filter cover and pull it towards you to remove it. |
| Cleaning the Condenser Filter | Not specified | LG recommends periodic cleaning of the condenser area for thorough cleaning. |
| Cleaning the Condenser Filter | Not specified | Please remove it by pulling it. |
| Cleaning the Condenser Filter | Not specified | To clean off any residual lint, use a vacuum cleaner or rinse the mesh filter under running water. |
| Cleaning the Condenser Filter | Not specified | The filter must be completely dry before using or it could cause an unpleasant odor. |
| Cleaning the Condenser Filter | Not specified | Grip the internal filter and pull straight out to remove. |
| Cleaning the Condenser Filter | Not specified | Rinse it under running water. |
| Cleaning the Condenser Filter | Not specified | Clean the inside thoroughly with a nylon brush. |
| Cleaning the Condenser Filter | Not specified | Do not touch the condenser fins with bare hands. |
| Cleaning the Condenser Filter | Not specified | After cleaning, reassemble the condenser filter. |
| Cleaning the Condenser Filter | Not specified | Clean the passage behind the circular filter with a brush. |
| Cleaning the Condenser Filter | Not specified | Reassemble the internal filter and the external filter assembly. |
| Periodic Maintenance | Not specified | Use a towel or soft cloth to wipe around the washer door opening and door glass. |
| Periodic Maintenance | Not specified | Always remove items from the washer as soon as the cycle is complete. |
| Periodic Maintenance | Not specified | Leaving damp items in the washer can cause wrinkling, color transfer, and odor. |
| Cleaning the Drum | Monthly | Run the Tub Clean cycle monthly to remove residue and prevent odor. |
| Cleaning the Drum | Not specified | Make sure to run the Tub Clean cycle only when the drum is empty. |
| Cleaning the Drum | Not specified | Never load laundry while using this cycle. |
| Cleaning the Drum | Not specified | The laundry may be damaged or contaminated with cleaning products. |
| Cleaning the Drum | As needed | Run the cycle more often under heavy use conditions or if odor is already present. |
| Cleaning the Drum | Not specified | Remove any clothing from the drum. |
| Cleaning the Drum | Not specified | Add cleaning agents. |
| Cleaning the Drum | Not specified | For other drum cleaning products, follow the cleaner manufacturer’s instructions and recommendations. |
| Cleaning the Drum | Not specified | Do not exceed the maximum fill line when adding bleach or powdered cleaners. |
| Cleaning the Drum | Not specified | Powdered cleaners may remain in the drum after cleaning. |
| Cleaning the Drum | Not specified | Close the door and press the Power button. |
| Cleaning the Drum | Not specified | Select the Tub Clean cycle and press the Start/Pause button to begin the cycle. |
| Cleaning the Drum | Not specified | After the cycle ends, open the door and allow the drum interior to dry completely. |
| Cleaning the Drum | Not specified | Make sure children and pets do not climb into the drum. |
| Cleaning the Drum | Not specified | Engage the Control Lock feature if needed to prevent children from accidentally starting a wash cycle. |
| Removing Mineral Buildup | Not specified | In areas with hard water, mineral scale can form on internal components of the washer. |
| Removing Mineral Buildup | As needed | Periodically clean the mineral buildup on the internal components to extend the lifespan of the washer. |
| Removing Mineral Buildup | Not specified | Use of a water softener is recommended in areas with hard water. |
| Removing Mineral Buildup | Not specified | Use a descaler to remove visible mineral buildup on the washer drum. |
| Removing Mineral Buildup | Not specified | After descaling, always run the Tub Clean cycle before washing clothing. |
| Removing Mineral Buildup | Not specified | Mineral scale and other spots may be removed from the stainless steel drum using a soft cloth soaked in stainless steel cleaner. |
| Removing Mineral Buildup | Not specified | Do not use steel wool or abrasive cleaners. |
| Leaving the Door Open | Not specified | After you finish using the washer, leave the door open overnight to allow air to circulate and dry the drum. |
| Leaving the Door Open | Not specified | This helps prevent odors. |
| Cleaning the ezDispense Drawer | Not specified | Remove and clean the ezDispense reservoir every time you refill the detergent/softener or change to a new type of detergent/softener. |
| Cleaning the ezDispense Drawer | Once or twice a month | Remove and clean the detergent dispenser drawer once or twice a month. |
| Cleaning the ezDispense Drawer | Not specified | Leaving detergent in the detergent dispenser drawer for an extended period or using the washer for a long time may cause the build-up of residue in the detergent dispenser drawer. |
| Cleaning the ezDispense Drawer | Not specified | Do not spray water inside the washer. |
| Cleaning the ezDispense Drawer | Not specified | Turn off the washer, and unplug the power cord. |
| Cleaning the ezDispense Drawer | Not specified | Pull out the dispenser drawer until it stops and press down the disengage button to completely remove the drawer. |
| Cleaning the ezDispense Drawer | Not specified | Remove the ezDispense reservoirs from the drawer, and open the reservoir lids. |
| Cleaning the ezDispense Drawer | Not specified | Rinse the drawer in warm water to dissolve the detergent or softener scale. |
| Cleaning the ezDispense Drawer | Not specified | Clean the outsides of the ezDispense reservoirs and inserts with warm water. |
| Cleaning the ezDispense Drawer | Not specified | Use a soft cloth or brush to remove any residue. |
| Cleaning the ezDispense Drawer | Not specified | Do not use soap when cleaning the drawer and inserts. |
| Cleaning the ezDispense Drawer | Not specified | If the detergent or softener is hardened inside the ezDispense reservoirs, remove the covers on the reservoirs, and clean the insides of the reservoirs with warm water. |
| Cleaning the ezDispense Drawer | Not specified | Use a soft cloth or brush to clean and to remove any residue. |
| Cleaning the ezDispense Drawer | Not specified | Do not use soap when cleaning the reservoirs. |
| Cleaning the ezDispense Drawer | Not specified | Securely close the covers on the ezDispense reservoirs. |
| Cleaning the ezDispense Drawer | Not specified | Wipe off any moisture with a dry towel or cloth after cleaning. |
| Cleaning the ezDispense Drawer | Not specified | Reassemble the reservoirs and reinstall the dispenser drawer. |
| Cleaning the Door Seal | Monthly | Clean the door seal once a month to prevent build-up of dirt. |
| Cleaning the Door Seal | Not specified | Cleaning the door seal with undiluted bleach may cause malfunction of the door seal and washer parts. |
| Cleaning the Door Seal | Not specified | Wear rubber gloves and protective goggles. |
| Cleaning the Door Seal | Not specified | Wipe around the door seal. |
| Cleaning the Door Seal | Not specified | Soak a sponge or a soft cloth in this diluted solution and wipe all around the door seal. |
| Cleaning the Door Seal | Not specified | Wipe up any moisture with a dry towel or cloth after cleaning. |
| Cleaning the Door Seal | Not specified | Leave the door open to allow the door seal to dry completely. |
| Cleaning the Water Inlet Filters | Not specified | If the washer does not fill properly, an error message will appear on the display. |
| Cleaning the Water Inlet Filters | Not specified | Operating the washer with these filters removed could cause a valve to open continuously, resulting in flooding and/or property damage. |
| Cleaning the Water Inlet Filters | Not specified | Do not use the washer without the inlet filters. |
| Cleaning the Water Inlet Filters | Not specified | If you use the washer in an area with hard water, the inlet filter may clog due to lime buildup and require more frequent cleaning. |
| Cleaning the Water Inlet Filters | Not specified | Turn off the washer, and unplug the power cord. |
| Cleaning the Water Inlet Filters | Not specified | Turn off hot and cold water faucets. |
| Cleaning the Water Inlet Filters | Not specified | Unscrew the hot and cold water hoses from the back of the washer. |
| Cleaning the Water Inlet Filters | Not specified | Remove the filters from the water valves carefully. |
| Cleaning the Water Inlet Filters | Not specified | Use pliers to pull out the filters from the water valves. |
| Cleaning the Water Inlet Filters | Not specified | Remove foreign objects and soak the filters in white vinegar or a lime scale remover. |
| Cleaning the Water Inlet Filters | Not specified | If using a lime scale remover, follow the manufacturer’s instructions. |
| Cleaning the Water Inlet Filters | Not specified | Be careful not to damage the filters while cleaning them. |
| Cleaning the Water Inlet Filters | Not specified | Rinse filters thoroughly and press them back into place. |
| Cleaning the Water Inlet Filters | Not specified | Before reattaching the water inlet hoses, flush them by running several gallons of water through them into a bucket or drain, preferably with the faucets wide open for maximum flow. |
| Cleaning the Water Inlet Filters | Not specified | Clean the inlet filter. |
| Cleaning the Drain Pump Filter | Not specified | The washer fails to drain if the drain pump filter is clogged. |
| Cleaning the Drain Pump Filter | As needed | Periodically clean the drain filter to prevent clogging with foreign objects. |
| Cleaning the Drain Pump Filter | Not specified | Use a bucket if the drum is not completely drained before you open the drain filter. |
| Cleaning the Drain Pump Filter | Not specified | Using the washer without the drain filter or with an incorrectly assembled drain filter may cause leaks or malfunction of the washer. |
| Cleaning the Drain Pump Filter | Not specified | Turn off the washer, and unplug the power cord. |
| Cleaning the Drain Pump Filter | Not specified | Open the drain pump filter cover. |
| Cleaning the Drain Pump Filter | Not specified | Unclip the drain hose and remove the plug from the drain hose to drain the remaining water. |
| Cleaning the Drain Pump Filter | Not specified | Remove the pump filter. |
| Cleaning the Drain Pump Filter | Not specified | Twist the pump filter counterclockwise to remove. |
| Cleaning the Drain Pump Filter | Not specified | Clean the pump filter and opening. |
| Cleaning the Drain Pump Filter | Not specified | Reassemble the plug onto the drain hose and reclip the drain hose. |
| Cleaning the Drain Pump Filter | Not specified | Insert the drain pump filter and twist it clockwise. |
| Cleaning the Drain Pump Filter | Not specified | Close the drain pump filter cover. |
| Cleaning the Drain Pump Filter | Not specified | Clean the drain pump filter. |
| Storing the Washer | Not specified | If the washer will not be used for an extended period and is in an area that could be exposed to freezing temperatures, follow these steps to protect the washer from damage. |
| Storing the Washer | Not specified | Turn off the washer, and unplug the power cord. |
| Storing the Washer | Not specified | Turn off the water faucets. |
| Storing the Washer | Not specified | Disconnect the water inlet hoses. |
| Storing the Washer | Not specified | Plug the power cord into a properly grounded electrical outlet. |
| Storing the Washer | Not specified | Add 1 gallon of nontoxic recreational vehicle (RV) antifreeze to the empty drum and close the door. |
| Storing the Washer | Not specified | Never use automotive antifreeze. |
| Storing the Washer | Not specified | Turn on the washer and press the Spin button. |
| Storing the Washer | Not specified | Press the Start/Pause button to start the drain pump for 1 minute. |
| Storing the Washer | Not specified | This will expel some of the antifreeze, leaving enough to protect the washer from damage. |
| Storing the Washer | Not specified | Turn off the washer and unplug the power cord. |
| Storing the Washer | Not specified | Dry the drum interior with a soft cloth, and close the door. |
| Storing the Washer | Not specified | Store the washer in an upright position. |
| Storing the Washer | Not specified | Remove the inserts from the dispenser. |
| Storing the Washer | Not specified | Drain any water in the compartments and let them dry. |
| Storing the Washer | Not specified | To remove the antifreeze from the washer after storage, run the Rinse+Spin cycle using detergent. |
| Storing the Washer | Not specified | Do not add laundry to this cycle. |
| When the Water Inlet Hoses Are Frozen | Not specified | Turn off the washer, and unplug the power cord. |
| When the Water Inlet Hoses Are Frozen | Not specified | Turn off the faucets connected to the water inlet hoses. |
| When the Water Inlet Hoses Are Frozen | Not specified | Pour hot water on the frozen faucets to thaw the water inlet hoses and remove the water inlet hoses. |
| When the Water Inlet Hoses Are Frozen | Not specified | Reconnect the water inlet hoses to the water inlets of the washer and to the faucets. |
| When the Water Inlet Hoses Are Frozen | Not specified | Turn on the faucets. |
| When the Water Inlet Hoses Are Frozen | Not specified | Press the Power button to turn on the washer. |
| When the Water Inlet Hoses Are Frozen | Not specified | Turn the knob to select Spin Only cycle for draining and spinning. |
| When the Water Inlet Hoses Are Frozen | Not specified | Press the Start/Pause button. |
| When the Drain Hose Is Frozen | Not specified | Pour hot water in the washer drum and close the door. |
| When the Drain Hose Is Frozen | Not specified | Wait for 1 - 2 hours. |
| When the Drain Hose Is Frozen | Not specified | Press the Power button. |
| When the Drain Hose Is Frozen | Not specified | Turn the knob to select Spin Only cycle for draining and spinning. |
| When the Drain Hose Is Frozen | Not specified | Press the Start/Pause button to make sure the water drains. |
Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.
Current LG promotions, plus offers from similar brands.