The JFC2290RE is a full-size JennAir french-door. Sold in monochromatic stainless steel.
Status
Supported
Finishes
Monochromatic Stainless Steel (JFC2290REM)
Model years come from the earliest dated manufacturer or certification record we hold; where a manufacturer never published a discontinuation date, no end year is shown.
Dispenser
Not stated in the manufacturer’s documents
Ice Maker
Not stated in the manufacturer’s documents
Width
35.63 in
Parts & Labor
1 year parts and labor
Years 1-1 from purchase
Counter Depth
TriSensor™ Electronic Climate Control
Spill-Proof Glass Shelves
Humidity-Controlled Crispers
Gourmet Bay Drawer
Internal Water Dispenser
Automatic Defrost
Automatic Ice Maker with Storage Drawer
Max Cool
Max Ice Option
LED Display
Sabbath Mode
Written from the record's fields, not from reviews. This report covers 3 models.
Expected lifespan is ApplianceEdge's estimate, formed from category lifetime data, service records and warranty terms. It is not a prediction for your unit and not a manufacturer figure — with proper care and maintenance, many appliances last well beyond this range. Everything else on this tab is written from the record's fields.
What to Expect
JennAir's US service page offers repairs through trained and certified technicians using genuine OEM parts. JennAir's own site directs customers to https://www.jennairreplacementparts.com/ for replacement parts. Full warranty terms are in Owning It.
JennAir's US service page offers repairs through trained and certified technicians using genuine OEM parts.
Parts
JennAir's own site directs customers to https://www.jennairreplacementparts.com/ for replacement parts.
Support
JennAir's manufacturer support entry provides model-specific ownership resources and service routes.
Repair
What’s Involved
DIY
Parts
Labor
DIY
Advanced DIY
What’s Involved
Replace ice maker assembly; sometimes auger/chute or sealed housing work.
Usually 2–7 days without it
Parts
Ice Maker Assembly
$80–$240
Labor
$150–$325
Ice Maker
Replace ice maker assembly; sometimes auger/chute or sealed housing work. Usually 2–7 days without it
Advanced DIY
Ice Maker Assembly
$80–$240
$150–$325
DIY
Advanced DIY
What’s Involved
Water pressure, filter flow, valves, switches, and tubing are tested, and the failed valve or dispenser component is replaced.
Parts
Water inlet valve
$40–$150
Water filter housing / manifold
$50–$150
Internal water reservoir / tank / reservoir tubing
$50–$150
Dispenser paddle / microswitch
$20–$60
Dispenser control board / user interface
$120–$250
Labor
$125–$325
Water Inlet Valve / Dispenser Assembly
Water pressure, filter flow, valves, switches, and tubing are tested, and the failed valve or dispenser component is replaced.
Advanced DIY
Water inlet valve
$40–$150
Water filter housing / manifold
$50–$150
Internal water reservoir / tank / reservoir tubing
$50–$150
Dispenser paddle / microswitch
$20–$60
Dispenser control board / user interface
$120–$250
$125–$325
DIY
Advanced DIY
What’s Involved
The technician verifies evaporator airflow and damper movement, then replaces the failed fan motor or damper assembly.
Parts
Evaporator fan blade / impeller
$15–$60
Evaporator fan motor
$50–$160
Air damper / diffuser control
$50–$200
Labor
$150–$425
Evaporator Fan Motor / Air Damper
The technician verifies evaporator airflow and damper movement, then replaces the failed fan motor or damper assembly.
Advanced DIY
Evaporator fan blade / impeller
$15–$60
Evaporator fan motor
$50–$160
Air damper / diffuser control
$50–$200
$150–$425
DIY
Advanced DIY
What’s Involved
Replace defrost heater/thermostat/board.
Usually 1–3 days without it
Parts
Defrost thermostat / evaporator defrost sensor
$25–$70
Defrost heater
$40–$110
Electronic / adaptive defrost control board
$150–$300
Labor
$125–$425
Defrost System
Replace defrost heater/thermostat/board. Usually 1–3 days without it
Advanced DIY
Defrost thermostat / evaporator defrost sensor
$25–$70
Defrost heater
$40–$110
Electronic / adaptive defrost control board
$150–$300
$125–$425
DIY
Technician job
What’s Involved
Replace compressor / sealed-system repair.
Usually 3–14 days without it
Parts
Compressor
$340–$460
Evaporator assembly / refrigerant leak
$250–$525
Labor
$500–$850
Compressor / Sealed System
Replace compressor / sealed-system repair. Usually 3–14 days without it
Technician job
Compressor
$340–$460
Evaporator assembly / refrigerant leak
$250–$525
$500–$850
DIY
Advanced DIY
What’s Involved
Replace main or dispenser control board.
Usually 2–10 days without it
Parts
Main Control Board
$285–$365
Dispenser Control Board
$190–$255
Labor
$125–$325
Control Board
Replace main or dispenser control board. Usually 2–10 days without it
Advanced DIY
Main Control Board
$285–$365
Dispenser Control Board
$190–$255
$125–$325
DIY
Advanced DIY
What’s Involved
The drain path and pressurized water tubing are isolated, then cleared, repaired, or replaced as required.
Parts
Drain tube / P-trap
$40–$45
Water tubing
$25–$65
Labor
$150–$325
Defrost Drain / Water Tubing
The drain path and pressurized water tubing are isolated, then cleared, repaired, or replaced as required.
Advanced DIY
Drain tube / P-trap
$40–$45
Water tubing
$25–$65
$150–$325
DIY
Advanced DIY
What’s Involved
Sensor values and damper operation are tested and the failed thermistor or damper is replaced.
Parts
Thermistor / temperature sensor
$25–$75
Air damper / diffuser control
$50–$200
Main electronic control board
$150–$300
Labor
$125–$325
Thermistor / Air-Damper Control
Sensor values and damper operation are tested and the failed thermistor or damper is replaced.
Advanced DIY
Thermistor / temperature sensor
$25–$75
Air damper / diffuser control
$50–$200
Main electronic control board
$150–$300
$125–$325
DIY
Advanced DIY
What’s Involved
Door alignment is corrected and the worn gasket or heated mullion assembly is replaced.
Parts
Door Gasket
$70–$150
Center Mullion / Flipper
$100–$150
Labor
$125–$250
Door Gasket / Center Mullion Assembly
Door alignment is corrected and the worn gasket or heated mullion assembly is replaced.
Advanced DIY
Door Gasket
$70–$150
Center Mullion / Flipper
$100–$150
$125–$250
DIY
Advanced DIY
What’s Involved
The condenser is cleaned and the failed fan motor or blade is replaced after voltage and obstruction checks.
Parts
Condenser Fan Motor
$50–$85
Labor
$150–$325
Condenser Fan Motor
The condenser is cleaned and the failed fan motor or blade is replaced after voltage and obstruction checks.
Advanced DIY
Condenser Fan Motor
$50–$85
$150–$325
Easy DIY: basic tools, under an hour. Moderate: some disassembly. Advanced: experience with the machine's internals. Technician: sealed-system, electrical or tub-split work.
Parts prices don’t move much across the country; labor does. If a technician supplies the part, expect 40–50% on top of the part price.
This report is built from the manufacturer’s own documents — specification sheets, manuals, installation guides and recall notices — read for this model and cited on the page. Where a document doesn’t print a fact, the row is left out rather than filled in. Coverage grows as each brand’s documents are read; what you see is what we could verify.
Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.