The KBSD708M is a full-size KitchenAid refrigerator (29.4 cu ft). Introduced in 2022 and sold in black stainless steel, stainless steel, and stainless steel.
Status
Discontinued
Model Years
Introduced 2022
Capacity
29.4 cu ft
19.1 fridge · 10.3 freezer
Finishes
Black Stainless Steel (KBSD708MBS)
Stainless Steel (KBSD708MPS)
Stainless Steel (KBSD708MSS)
Model years come from the earliest dated manufacturer or certification record we hold; where a manufacturer never published a discontinuation date, no end year is shown.
Dispenser
Through-the-door ice and water
Ice Maker
Ice maker included
Water Filter
EDR3RXD1 · replace every 6 months
Air Filter
W10311524 · replace every 6 months
Through-the-door dispensers are the most common source of refrigerator service calls; the issues are usually repairable.
Width
47 in
Height
83.38 in
Wi-Fi
No
Energy Star
Yes
Energy Use
804 kWh / yr
Parts & Labor
2 years parts and labor
Years 1-2 from delivery of original purchase
Gallon Door Bin
SatinGlide® Drawers
FreshChill™ Temperature Controlled Drawer
Under-Shelf Prep Zone
Sliding Storage Tray
Measured Water Fill
Easy Access Bin
ExtendFresh™ Plus Temperature Management System
Max Cool
Max Freeze
LED Lighting System
Platinum-Colored Interior
PrintShield™ Finish
Touchscreen Controls
FreshFlow™ Air Filter
Exterior Ice and Water Dispenser
Factory Installed Icemaker
Star-K Certified Sabbath Mode
Total Capacity
Written from the record's fields, not from reviews. This report covers 3 models. Sources: Energy Star record
Expected lifespan is ApplianceEdge's estimate, formed from category lifetime data, service records and warranty terms. It is not a prediction for your unit and not a manufacturer figure — with proper care and maintenance, many appliances last well beyond this range. Everything else on this tab is written from the record's fields. Sources: Energy Star record
What to Expect
KitchenAid's US service page offers repairs through trained and certified technicians using genuine OEM parts. KitchenAid's own site directs customers to https://www.kitchenaidparts.com/ for replacement parts. Full warranty terms are in Owning It.
KitchenAid's US service page offers repairs through trained and certified technicians using genuine OEM parts.
Parts
KitchenAid's own site directs customers to https://www.kitchenaidparts.com/ for replacement parts.
Support
KitchenAid's manufacturer support entry provides model-specific ownership resources and service routes.
Repair
What’s Involved
DIY
Parts
Labor
DIY
Advanced DIY
What’s Involved
The technician accesses the concealed evaporator section, checks fan voltage and ice obstruction, and replaces the failed fan motor or assembly.
Parts
Evaporator Fan Motor
$80–$90
Air Damper
$105–$120
Labor
$250–$425
evaporator fan motor
The technician accesses the concealed evaporator section, checks fan voltage and ice obstruction, and replaces the failed fan motor or assembly.
Advanced DIY
Evaporator Fan Motor
$80–$90
Air Damper
$105–$120
$250–$425
DIY
Advanced DIY
What’s Involved
The evaporator is manually cleared and the failed heater, sensor, thermostat, wiring, or control output is identified and replaced.
Parts
Defrost thermostat / evaporator defrost sensor
$25–$70
Defrost heater
$40–$110
Electronic / adaptive defrost control board
$150–$300
Labor
$125–$425
defrost system failure — heater, sensor, thermostat, or control output
The evaporator is manually cleared and the failed heater, sensor, thermostat, wiring, or control output is identified and replaced.
Advanced DIY
Defrost thermostat / evaporator defrost sensor
$25–$70
Defrost heater
$40–$110
Electronic / adaptive defrost control board
$150–$300
$125–$425
DIY
Advanced DIY
What’s Involved
Water pressure, fill-valve operation, freezer temperature, and harvest are tested before replacing the failed ice maker or inlet valve.
Parts
Ice Maker Assembly
$200–$210
Water Inlet Valve
$85–$90
Labor
$150–$425
ice maker assembly or water inlet valve
Water pressure, fill-valve operation, freezer temperature, and harvest are tested before replacing the failed ice maker or inlet valve.
Advanced DIY
Ice Maker Assembly
$200–$210
Water Inlet Valve
$85–$90
$150–$425
DIY
Advanced DIY
What’s Involved
Power, sensors, fans, valves, and compressor commands are verified before the failed board is replaced and programmed where required.
Parts
Main Control Board
$215–$230
Labor
$250–$425
main electronic control board or user-interface board
Power, sensors, fans, valves, and compressor commands are verified before the failed board is replaced and programmed where required.
Advanced DIY
Main Control Board
$215–$230
$250–$425
DIY
Advanced DIY
What’s Involved
The heavy door and cabinetry clearances are aligned and the worn gasket, hinge, closer, or mounting hardware is replaced.
Parts
Door Gasket
$115–$185
Labor
$125–$250
door gasket, hinge, closer, or alignment hardware
The heavy door and cabinetry clearances are aligned and the worn gasket, hinge, closer, or mounting hardware is replaced.
Advanced DIY
Door Gasket
$115–$185
$125–$250
DIY
Advanced DIY
What’s Involved
The drain path and pressurized water lines are isolated, then thawed, cleared, repaired, or replaced with cabinet access restored afterward.
Parts
Drain tube / P-trap
$40–$45
Water tubing
$25–$65
Labor
$250–$425
blocked defrost drain, drain-pan heater, or leaking water tubing
The drain path and pressurized water lines are isolated, then thawed, cleared, repaired, or replaced with cabinet access restored afterward.
Advanced DIY
Drain tube / P-trap
$40–$45
Water tubing
$25–$65
$250–$425
DIY
Advanced DIY
What’s Involved
Actual temperatures and sensor resistance are compared and the failed sensor, damper, or harness is replaced.
Parts
Thermistor / temperature sensor
$25–$75
Air damper / diffuser control
$50–$200
Main electronic control board
$150–$300
Labor
$125–$325
thermistor, air damper, or zone-control sensor
Actual temperatures and sensor resistance are compared and the failed sensor, damper, or harness is replaced.
Advanced DIY
Thermistor / temperature sensor
$25–$75
Air damper / diffuser control
$50–$200
Main electronic control board
$150–$300
$125–$325
DIY
Advanced DIY
What’s Involved
The concealed condenser area is cleaned, airflow and voltage are checked, and the failed fan motor or blade is replaced.
Parts
Condenser Fan Motor
$75–$105
Labor
$250–$425
condenser fan motor
The concealed condenser area is cleaned, airflow and voltage are checked, and the failed fan motor or blade is replaced.
Advanced DIY
Condenser Fan Motor
$75–$105
$250–$425
DIY
Technician job
What’s Involved
A factory-authorized or EPA-certified technician pressure-tests the affected refrigeration circuit and repairs the leak or replaces the compressor, filter-drier, and related sealed-system components.
Parts
Compressor
$850–$1,000
Evaporator assembly / refrigerant leak
$625–$1,050
Labor
$500–$850
compressor or sealed-system leak/restriction
A factory-authorized or EPA-certified technician pressure-tests the affected refrigeration circuit and repairs the leak or replaces the compressor, filter-drier, and related sealed-system components.
Technician job
Compressor
$850–$1,000
Evaporator assembly / refrigerant leak
$625–$1,050
$500–$850
DIY
Easy DIY
What’s Involved
The condenser and grille are professionally cleaned and required cabinet ventilation and fan airflow are restored.
Parts
$0–$30
Labor
$145–$145
dirty or obstructed condenser / ventilation problem
The condenser and grille are professionally cleaned and required cabinet ventilation and fan airflow are restored.
Easy DIY
$0–$30
$145–$145
Easy DIY: basic tools, under an hour. Moderate: some disassembly. Advanced: experience with the machine's internals. Technician: sealed-system, electrical or tub-split work.
Parts prices don’t move much across the country; labor does. If a technician supplies the part, expect 40–50% on top of the part price.
This report is built from the manufacturer’s own documents — specification sheets, manuals, installation guides and recall notices — read for this model and cited on the page. Where a document doesn’t print a fact, the row is left out rather than filled in. Coverage grows as each brand’s documents are read; what you see is what we could verify.
Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.