Repair or Replace Energy Savings Model Reports Shop Talk Promotions About Contact Get Started
← Maytag

Maytag MED5630H

✓ VERIFIED
Dryer2018–present

Typical Maytag MED5630H repair jobs and what they cost.

Repair
What’s Involved
DIY
Parts
Labor
DIY
Easy DIY
What’s Involved
The full exhaust path and internal lint passages are cleaned, crushed ducting is corrected, and airflow is measured at the outlet.
Parts
$0⁠–⁠$60
Labor
$75–$130
Exhaust Vent / Lint Blockage
The full exhaust path and internal lint passages are cleaned, crushed ducting is corrected, and airflow is measured at the outlet.
Easy DIY
$0⁠–⁠$60
$75–$130
DIY
Advanced DIY
What’s Involved
The failed fuse/cutoff is replaced only after airflow, cycling temperatures, and the underlying overheating cause are corrected.
Parts
Thermal fuse
$15⁠–⁠$25
Thermal cut-off / high-limit thermostat kit
$45⁠–⁠$60
Labor
$125–$250
Thermal Fuse / High-Limit Cutoff
The failed fuse/cutoff is replaced only after airflow, cycling temperatures, and the underlying overheating cause are corrected.
Advanced DIY
Thermal fuse
$15⁠–⁠$25
Thermal cut-off / high-limit thermostat kit
$45⁠–⁠$60
$125–$250
DIY
Moderate DIY
What’s Involved
Replace element (electric) or igniter/coils (gas).
Usually 1–3 days without it
Parts
Heating element
$55⁠–⁠$85
Labor
$150–$325
Heating Element / Gas Igniter
Replace element (electric) or igniter/coils (gas). Usually 1–3 days without it
Moderate DIY
Heating element
$55⁠–⁠$85
$150–$325
DIY
Easy DIY
What’s Involved
The cabinet is opened and the broken or stretched belt is replaced after the idler and drum supports are checked.
Parts
Drive Belt
$15⁠–⁠$55
Labor
$150–$325
Drive Belt
The cabinet is opened and the broken or stretched belt is replaced after the idler and drum supports are checked.
Easy DIY
Drive Belt
$15⁠–⁠$55
$150–$325
DIY
Moderate DIY
What’s Involved
Replace rollers, bearing, idler, belt.
Usually 1–3 days without it
Parts
Drum rollers / idler / wear-kit hardware
$20⁠–⁠$80
Rear drum bearing / bearing kit
$40⁠–⁠$125
Labor
$150–$325
Drum Rollers / Bearing / Belt
Replace rollers, bearing, idler, belt. Usually 1–3 days without it
Moderate DIY
Drum rollers / idler / wear-kit hardware
$20⁠–⁠$80
Rear drum bearing / bearing kit
$40⁠–⁠$125
$150–$325
DIY
Advanced DIY
What’s Involved
Ignition is observed through repeated cycles and weak valve coils are replaced when they fail after warming.
Parts
Gas Valve Coils
$25⁠–⁠$40
Labor
$150–$325
Gas Valve Coil Set
Ignition is observed through repeated cycles and weak valve coils are replaced when they fail after warming.
Advanced DIY
Gas Valve Coils
$25⁠–⁠$40
$150–$325

Easy DIY: basic tools, under an hour. Moderate: some disassembly. Advanced: experience with the machine's internals. Technician: sealed-system, electrical or tub-split work.

Parts prices don’t move much across the country; labor does. If a technician supplies the part, expect 40–50% on top of the part price.

Full Maytag Model Report

Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.

See what Maytag has on sale today

Current Maytag promotions, plus offers from similar brands.

View Maytag promotions →
ApplianceEdge is not currently compensated for links on this site. Read our disclosure.