The full exhaust path and internal lint passages are cleaned, crushed ducting is corrected, and airflow is measured at the outlet.
Parts
$0–$60
Labor
$75–$130
Exhaust Vent / Lint Blockage
The full exhaust path and internal lint passages are cleaned, crushed ducting is corrected, and airflow is measured at the outlet.
Easy DIY
$0–$60
$75–$130
DIY
Advanced DIY
What’s Involved
The failed fuse/cutoff is replaced only after airflow, cycling temperatures, and the underlying overheating cause are corrected.
Parts
Thermal fuse
$15–$25
Thermal cut-off / high-limit thermostat kit
$45–$60
Labor
$125–$250
Thermal Fuse / High-Limit Cutoff
The failed fuse/cutoff is replaced only after airflow, cycling temperatures, and the underlying overheating cause are corrected.
Advanced DIY
Thermal fuse
$15–$25
Thermal cut-off / high-limit thermostat kit
$45–$60
$125–$250
DIY
Moderate DIY
What’s Involved
Replace element (electric) or igniter/coils (gas).
Usually 1–3 days without it
Parts
Heating element
$55–$85
Labor
$150–$325
Heating Element / Gas Igniter
Replace element (electric) or igniter/coils (gas). Usually 1–3 days without it
Moderate DIY
Heating element
$55–$85
$150–$325
DIY
Easy DIY
What’s Involved
The cabinet is opened and the broken or stretched belt is replaced after the idler and drum supports are checked.
Parts
Drive Belt
$15–$55
Labor
$150–$325
Drive Belt
The cabinet is opened and the broken or stretched belt is replaced after the idler and drum supports are checked.
Easy DIY
Drive Belt
$15–$55
$150–$325
DIY
Moderate DIY
What’s Involved
Replace rollers, bearing, idler, belt.
Usually 1–3 days without it
Parts
Drum rollers / idler / wear-kit hardware
$20–$80
Rear drum bearing / bearing kit
$40–$125
Labor
$150–$325
Drum Rollers / Bearing / Belt
Replace rollers, bearing, idler, belt. Usually 1–3 days without it
Moderate DIY
Drum rollers / idler / wear-kit hardware
$20–$80
Rear drum bearing / bearing kit
$40–$125
$150–$325
DIY
Advanced DIY
What’s Involved
Ignition is observed through repeated cycles and weak valve coils are replaced when they fail after warming.
Parts
Gas Valve Coils
$25–$40
Labor
$150–$325
Gas Valve Coil Set
Ignition is observed through repeated cycles and weak valve coils are replaced when they fail after warming.
Advanced DIY
Gas Valve Coils
$25–$40
$150–$325
DIY
Advanced DIY
What’s Involved
The igniter and flame-sensor sequence are tested and the cracked or electrically open igniter is replaced.
Parts
Gas Burner Igniter
$30–$50
Labor
$150–$325
Gas Burner Igniter
The igniter and flame-sensor sequence are tested and the cracked or electrically open igniter is replaced.
Advanced DIY
Gas Burner Igniter
$30–$50
$150–$325
DIY
Easy DIY
What’s Involved
The door alignment and switch continuity are checked and the failed switch is replaced.
Parts
Door Switch
$20–$55
Labor
$125–$250
Door Switch
The door alignment and switch continuity are checked and the failed switch is replaced.
Easy DIY
Door Switch
$20–$55
$125–$250
DIY
Advanced DIY
What’s Involved
Replace drive motor.
Usually 2–5 days without it
Parts
Drive Motor
$160–$300
Labor
$250–$425
Motor
Replace drive motor. Usually 2–5 days without it
Advanced DIY
Drive Motor
$160–$300
$250–$425
DIY
Advanced DIY
What’s Involved
Replace control board.
Usually 2–7 days without it
Parts
Control Board
$225–$355
Labor
$150–$325
Control Board
Replace control board. Usually 2–7 days without it
Advanced DIY
Control Board
$225–$355
$150–$325
Parts
Gas valve assembly
$255–$275
Labor
$150–$325
Gas smell around the dryer
Gas valve assembly
$255–$275
$150–$325
Easy DIY: basic tools, under an hour. Moderate: some disassembly. Advanced: experience with the machine's internals. Technician: sealed-system, electrical or tub-split work.
Parts prices don’t move much across the country; labor does. If a technician supplies the part, expect 40–50% on top of the part price.
Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.
See what Amana has on sale today
Current Amana promotions, plus offers from similar brands.