Replace induction generator/inverter board. Usually 3–14 days without it
Technician job
Inverter / power module
$250–$330
$250–$425
DIY
Technician job
What’s Involved
Incoming voltage and downstream loads are isolated before the failed main board or power-supply board is replaced.
Parts
Induction main control PCB
$260–$315
Labor
$250–$425
Main Power / Control Board
Incoming voltage and downstream loads are isolated before the failed main board or power-supply board is replaced.
Technician job
Induction main control PCB
$260–$315
$250–$425
DIY
Advanced DIY
What’s Involved
The cooling path is cleaned and the fan is checked for voltage, obstruction, and bearing failure before replacement.
Parts
Electronics cooling fan
$55–$185
Labor
$250–$425
Electronics Cooling Fan
The cooling path is cleaned and the fan is checked for voltage, obstruction, and bearing failure before replacement.
Advanced DIY
Electronics cooling fan
$55–$185
$250–$425
DIY
Technician job
What’s Involved
Replace touch control / UI board.
Usually 2–7 days without it
Parts
Touch assembly
$260–$270
Control panel assembly
$315–$325
Labor
$250–$425
Touch Panel
Replace touch control / UI board. Usually 2–7 days without it
Technician job
Touch assembly
$260–$270
Control panel assembly
$315–$325
$250–$425
DIY
Advanced DIY
What’s Involved
Sensor readings and harness continuity are checked and the failed thermistor or sensing component is replaced.
Parts
Standalone coil thermistor / pan sensor / harness
$20–$150
Sensor integrated with induction coil / zone element
$80–$360
Labor
$250–$425
Coil Temperature Sensor / Pan-Detection Sensor
Sensor readings and harness continuity are checked and the failed thermistor or sensing component is replaced.
Advanced DIY
Standalone coil thermistor / pan sensor / harness
$20–$150
Sensor integrated with induction coil / zone element
$80–$360
$250–$425
DIY
Technician job
What’s Involved
The coil, harness, and paired power-module channel are tested and the failed coil/generator assembly is replaced.
Parts
Induction coil / zone element
$80–$360
Induction power module / modulation board
$325–$550
Labor
$250–$425
Induction Coil / Zone Generator
The coil, harness, and paired power-module channel are tested and the failed coil/generator assembly is replaced.
Technician job
Induction coil / zone element
$80–$360
Induction power module / modulation board
$325–$550
$250–$425
DIY
Easy DIY
What’s Involved
The oven bake element and its relay output are tested and the open or grounded element is replaced.
Parts
Bake element
$50–$90
Labor
$125–$250
Bake Element
The oven bake element and its relay output are tested and the open or grounded element is replaced.
Easy DIY
Bake element
$50–$90
$125–$250
DIY
Advanced DIY
What’s Involved
Actual temperature and sensor resistance are compared and the failed sensor is replaced and calibrated.
Parts
Oven temperature sensor
$20–$105
Labor
$150–$325
Oven Temperature Sensor
Actual temperature and sensor resistance are compared and the failed sensor is replaced and calibrated.
Advanced DIY
Oven temperature sensor
$20–$105
$150–$325
DIY
Advanced DIY
What’s Involved
The oven-side power, sensor inputs, and heating outputs are tested before the failed oven control is replaced.
Parts
Oven control board / oven PCB
$170–$270
Labor
$150–$325
Oven Control Board
The oven-side power, sensor inputs, and heating outputs are tested before the failed oven control is replaced.
Advanced DIY
Oven control board / oven PCB
$170–$270
$150–$325
DIY
Technician job
What’s Involved
The range is disconnected and the high-current wiring and electronic modules are inspected; burned connections or shorted modules are replaced.
Parts
Main power terminal block
$10–$55
Internal wire harness
$15–$105
Labor
$150–$425
Terminal Block / Power Wiring
The range is disconnected and the high-current wiring and electronic modules are inspected; burned connections or shorted modules are replaced.
Technician job
Main power terminal block
$10–$55
Internal wire harness
$15–$105
$150–$425
Parts
Glass / cooktop-frame assembly
$250–$375
Labor
$250–$425
Glass top is cracked or has a deep chip
Glass / cooktop-frame assembly
$250–$375
$250–$425
Easy DIY: basic tools, under an hour. Moderate: some disassembly. Advanced: experience with the machine's internals. Technician: sealed-system, electrical or tub-split work.
Parts prices don’t move much across the country; labor does. If a technician supplies the part, expect 40–50% on top of the part price.
Error codes, maintenance schedules and known issues come from manufacturer documents and official recall notices, not from reviews. Repair-cost ranges are ApplianceEdge estimates from our repair-economics library — typical parts and labor bands for this type of appliance, not a quote for your machine. We accept no payment from manufacturers, and no brand influences what we publish.
See what Whirlpool has on sale today
Current Whirlpool promotions, plus offers from similar brands.