DRZ is a Dacor luxury refrigeration family. The family emphasizes coordinated built-in or counter-depth styling, with configuration and width encoded after the family. Family identity is driven by freestanding versus integrated installation, door configuration, cabinet width, and the product generation.
Finish codes describe the outside of the machine. They do not change the underlying platform.
1DRZ30980 — also sold as DRZ30980LAP, DRZ30980RAP
These model numbers have been verified as belonging to the DRZ family. Small variations exist inside a family — your exact model is what ties recalls, known issues and repair guidance to your machine.
Living with a DRZ means the refrigerator is part of the house now — built into the wall, panel-matched, and expected to serve for decades. Day to day, keep the condenser serviced on schedule and let the pros handle the rest — these are built to be kept alive indefinitely. Parts won't be your problem — for the repair visit, the brand's service network is the usual road. Our data puts the ApplianceEdge Expected Lifespan at 14 years for this family. Treat that as the planning baseline, not the ceiling — well-maintained units regularly run past it.
ApplianceEdgeExpected Lifespan
14 yrsOur estimate for this family with normal use and basic care.
The ApplianceEdge Expected Lifespan is our editorial opinion, drawn from ownership patterns and market data. It is not a warranty, a prediction for your unit, or a substitute for an assessment of your machine’s actual condition.
Recall Information
No recalls on our record for this family. We watch official CPSC recall notices continuously to keep you protected — if anything ever changes, it will show up here.
Warranty Coverage
Full-size refrigeration sealed system
Dacor provides six-year parts-and-labor coverage on the sealed refrigeration system for qualifying full-size refrigeration.
Coverage varies by year and region. Confirm yours with Dacor against your exact model to be sure.
Recurring Issues to Watch For
No documented programs or service records are on file for this platform. These are common wear points for the category.
Evaporator fan motor
Fridge warm but another zone cold, or fan noise
Defrost system failure — heater, sensor, thermostat, or control output
Frost behind a panel, or cooling slowly fades
Ice maker assembly or water inlet valve
Ice maker stops, freezes up, or leaks
Main electronic control board or user-interface board
Intermittent cooling, dead display, or error codes
Door gasket, hinge, closer, or alignment hardware
Door won’t close flush, or condensation at the opening
Blocked defrost drain, drain-pan heater, or leaking water tubing
Water pools under drawers or below the unit
Thermistor, air damper, or zone-control sensor
Temperature swings, or food freezes in one zone
Condenser fan motor
Runs constantly, runs hot, or rattles in back
Compressor or sealed-system leak/restriction
One or both zones warm — runs but doesn’t cool
Dirty or obstructed condenser / ventilation problem
Weak cooling, compressor nearly always running
Maintenance Habits
Clean the condenser area only when the owner manual identifies it as user-accessible.
Inspect yearly; clean every 3–6 months in dusty, greasy or pet-heavy homes — Dust and pet hair restrict heat rejection, making the compressor and condenser fan run hotter and longer. Some newer designs are sealed or service-only, so the model manual controls.
Keep the door gasket clean and confirm it seals evenly all the way around.
Wipe monthly; inspect whenever condensation or frost appears — A dirty, folded or loose gasket leaks warm humid air into the cabinet. That drives longer run times and can create frost or condensation that looks like a cooling-system failure.
Replace the refrigerator water filter on schedule if the machine has one.
Every 6 months, at the indicator, or sooner if flow drops — A loaded filter restricts water flow. That can produce slow dispensing, undersized ice and low ice production without any failed valve or ice maker.
Verify cabinet temperature and leave room for internal and external airflow.
Check monthly and after major loading changes — A refrigerator cannot stabilize temperature when vents are buried or the cabinet is packed solid. A thermometer catches a slow cooling decline before food loss or a complete no-cool event.
Habits like these tend to extend the useful life of the appliance. They are not a guarantee against failure.
Dacor service goes through authorized third-party specialists found via its locator. Parts for the independent-era machines are still out there, but the deeper the repair, the more this is a specialist's brand.
Dacor's ZIP-based locator is the practical path: it returns certified servicers, parts distributors, and installers for your area, and warranty work routes through that certified channel. For the legacy machines from Dacor's independent years, ask specifically about experience with the era — the older equipment has its own habits.
Repair Economics
Most-Common Repair
$300–$750
evaporator fan motor
Common Repair
Typical Range
evaporator fan motor
$300–$750
defrost system failure — heater, sensor, thermostat, or control output
$300–$900
ice maker assembly or water inlet valve
$300–$900
main electronic control board or user-interface board
$500–$1,500
door gasket, hinge, closer, or alignment hardware
$300–$1,000
blocked defrost drain, drain-pan heater, or leaking water tubing
$250–$600
thermistor, air damper, or zone-control sensor
$250–$650
condenser fan motor
$300–$700
compressor or sealed-system leak/restriction
$1,200–$3,600
dirty or obstructed condenser / ventilation problem
$200–$450
Parts Availability
Parts Availability
Plentiful
Encompass and its PartStore storefront expose model catalogs for DRZ24980LAP; parts are purchasable through an authorized third-party distributor channel, though the two storefronts share one supply ledger.
This platform is generally approachable for a confident DIYer. The repairs owners face most often here — evaporator fan motor, defrost system failure — heater, sensor, thermostat, or control output and ice maker assembly or water inlet valve — can typically be handled with basic tools and patience. The jobs that go deeper — sealed-system and compressor work — belong to a licensed technician; that work requires EPA certification and recovery equipment, and there is no homeowner path for it.
This page draws on the ApplianceEdge Registry — 2,640 appliance families connected to more than 18,200 verified models, independently researched. We don’t know everything about this family yet, and we won’t pretend to: filter and accessory cross-references for this platform are still being verified. We only publish what we can stand behind, and the gaps close as the Registry grows.
ApplianceEdge assessments — lifespans, repair values, and reliability notes — are our editorial opinions, built from documented third-party sources: owner reports, industry pricing data, manufacturer literature, and official records. They describe patterns across a product family, not any individual machine; your experience may differ. Recall information links directly to official CPSC notices. We accept no payment from manufacturers, and no brand influences what we publish.
ApplianceEdge is not currently compensated for referrals made through links on this site. Links to products, retailers, and service providers are provided for convenience only. Our recommendations are based on ownership experience, reliability considerations, serviceability, and household fit—not compensation. No manufacturer or retailer pays for placement or favorable coverage.
