PHS93 is a GE Profile induction range family. It is the feature-led step-up GE platform, with connected controls and higher-spec cooking features varying by suffix. Induction format first; width, slide-in/pro chassis, oven configuration, and controls define the family.
These model numbers have been verified as belonging to the PHS93 family. Small variations exist inside a family — your exact model is what ties recalls, known issues and repair guidance to your machine.
Standard Warranty
1 Year Parts & Labor
Model Match Confidence
High
Ownership
How We See It
Living with a PHS93 means fast, precise cooking with more electronics under the glass than any other machine in the kitchen. Day to day, good cookware, a clean surface, and stable power are the care package; failures here are electronic, not mechanical. Parts are easy to find; independent techs handle most jobs, with the brand's network there for the complicated ones. Our data puts the ApplianceEdge Expected Lifespan at 12 years for this family. Treat that as the planning baseline, not the ceiling — well-maintained units regularly run past it.
ApplianceEdgeExpected Lifespan
12 yrsOur estimate for this family with normal use and basic care.
The ApplianceEdge Expected Lifespan is our editorial opinion, drawn from ownership patterns and market data. It is not a warranty, a prediction for your unit, or a substitute for an assessment of your machine’s actual condition.
Recall Information
No recalls on our record for this family. We watch official CPSC recall notices continuously to keep you protected — if anything ever changes, it will show up here.
Warranty Coverage
Standard full warranty
1 year parts & labor. Some components may carry longer coverage than the standard term — your warranty booklet or GE Profile can confirm for your exact model.
Coverage varies by year and region. Confirm yours with GE Profile against your exact model to be sure.
Recurring Issues to Watch For
No documented programs or service records are on file for this platform. These are common wear points for the category.
Inverter Board
Zones won’t heat, or pan isn’t detected
Main Power / Control Board
Cooktop dead, resets, or errors out
Electronics Cooling Fan
Shuts down when hot, or fan is noisy or dead
Touch Panel
Touch controls unresponsive or erratic
Coil Temperature Sensor / Pan-Detection Sensor
Zone cuts off early, or sensor error codes
Induction Coil / Zone Generator
One zone dead though controls seem normal
Bake Element
Oven won’t heat, or preheats very slowly
Oven Temperature Sensor
Oven runs too hot, too cold, or uneven
Oven Control Board
Oven controls fail while cooktop still works
Terminal Block / Power Wiring
Burning smell, sparks, or repeated breaker trips
Glass top is cracked or has a deep chip
Maintenance Habits
Keep the oven vents clear and spot-clean heavy spills before they carbonize.
Check every use; spot-clean after the oven cools — Blocked vents trap heat around controls; baked-on grease absorbs heat, smokes and makes later cleaning harsher on enamel and seals.
Remove racks and accessories before running self-clean, and follow the model instructions.
Every self-clean cycle — Self-clean temperatures can discolor or bind racks and damage accessories not designed for the cycle. Correct preparation reduces needless rack and door-lock failures.
Wipe the cooktop after use and remove sugary spills before they cool hard.
After every use; sugary spills immediately when safe — Cooked-on residue interferes with pan contact and can permanently mark or pit glass. Gentle daily cleaning avoids the aggressive scraping that causes scratches.
Habits like these tend to extend the useful life of the appliance. They are not a guarantee against failure.
Profile gets the same GE service machine — factory techs and certified locals — with a more refined machine on the bench. Parts stay deep.
GE Profile uses GE's service machinery: book through Bodewell online or by phone, and either a GE factory tech (common in larger metros) or an authorized servicer takes the call. Parts and repair knowledge are broadly available beyond the warranty years.
Repair Economics
Most-Common Repair
$350–$1,100
Inverter Board
Common Repair
Typical Range
Inverter Board
$350–$1,100
Main Power / Control Board
$450–$1,100
Electronics Cooling Fan
$175–$425
Touch Panel
$250–$775
Coil Temperature Sensor / Pan-Detection Sensor
$175–$450
Induction Coil / Zone Generator
$300–$1,000
Bake Element
$150–$450
Oven Temperature Sensor
$100–$250
Oven Control Board
$250–$750
Terminal Block / Power Wiring
$250–$1,100
$350–$900
Parts Availability
Parts Availability
Plentiful
Sears PartsDirect and PartSelect each resolve to model-specific purchasing catalogs for PHS930BP7TS / PHS930BPTS. Both are usable third-party purchasing channels for functional repair parts.
This platform is generally approachable for a confident DIYer. The repairs owners face most often here — Bake Element and Oven Temperature Sensor — can typically be handled with basic tools and patience. Any job involving electrical safety components belongs to a licensed technician.
This page draws on the ApplianceEdge Registry — 2,640 appliance families connected to more than 18,200 verified models, independently researched. We don’t know everything about this family yet, and we won’t pretend to: finish records, filter and accessory cross-references, and warranty information for this platform are still being verified. We only publish what we can stand behind, and the gaps close as the Registry grows.
ApplianceEdge assessments — lifespans, repair values, and reliability notes — are our editorial opinions, built from documented third-party sources: owner reports, industry pricing data, manufacturer literature, and official records. They describe patterns across a product family, not any individual machine; your experience may differ. Recall information links directly to official CPSC notices. We accept no payment from manufacturers, and no brand influences what we publish.
ApplianceEdge is not currently compensated for referrals made through links on this site. Links to products, retailers, and service providers are provided for convenience only. Our recommendations are based on ownership experience, reliability considerations, serviceability, and household fit—not compensation. No manufacturer or retailer pays for placement or favorable coverage.
