The 106.7215 family is a Whirlpool-built Kenmore top-freezer with the freezer above a single fresh-food door and an optional ice maker on equipped versions. It is a simple, value-oriented platform rather than a feature-heavy refrigerator.
These model numbers have been verified as belonging to the 106.7215 family. Small variations exist inside a family — your exact model is what ties recalls, known issues and repair guidance to your machine.
Living with a 106.7215 is refrigeration stripped to what matters — cold box, freezer, done. Its strength is the conventional layout and relatively uncomplicated component set. Exact-model parts records show broad support for common shelves, bins, controls, fans, and defrost components. Day to day, clean the coils now and then and keep the gaskets sealing — there isn't much else to do, which is exactly the point. Parts won't be your problem — for the repair visit, the brand's service network is the usual road. Our data puts the ApplianceEdge Expected Lifespan at 13 years for this family. Treat that as the planning baseline, not the ceiling — well-maintained units regularly run past it.
ApplianceEdgeExpected Lifespan
13 yrsOur estimate for this family with normal use and basic care.
The ApplianceEdge Expected Lifespan is our editorial opinion, drawn from ownership patterns and market data. It is not a warranty, a prediction for your unit, or a substitute for an assessment of your machine’s actual condition.
Recall Information
No recalls on our record for this family. We watch official CPSC recall notices continuously to keep you protected — if anything ever changes, it will show up here.
Warranty Coverage
Kenmore PRO refrigeration sealed system / compressor
Kenmore PRO refrigerators and freezers list five years on the sealed refrigerant system and ten years on the linear compressor; after year one, coverage is generally parts-only.
Coverage varies by year and region. Confirm yours with Kenmore against your exact model to be sure.
Recurring Issues to Watch For
On the Radar
Active investigation: Kenmore refrigerators on LG platforms
An active investigation concerns Kenmore 795.* LG-built refrigerators appearing in compressor-failure litigation. No finding or defined population has been established.
(category-level wear points)
Defrost System
Fridge warm but freezer cold, or frost on back wall
Fan Motor
Not cooling well, or fan is noisy or dead
Ice Maker / Water Inlet Valve
Ice maker stopped making ice
Defrost Drain (Clogged)
Water pools under crisper drawers or on the floor
Compressor Start Relay
Makes clicking sound repeatedly but won’t cool
Thermostat / Thermistor
Temperature swings, or food freezes in the fridge
Door Gasket
Door won’t seal, or condensation at the opening
Condenser Fan Motor
Runs constantly, runs hot, or rattles in back
Main Control Board
Intermittent cooling, dead display, or error codes
Compressor / Sealed System
Fridge and freezer warm — runs but doesn’t cool
Maintenance Habits
Clean the condenser area only when the owner manual identifies it as user-accessible.
Inspect yearly; clean every 3–6 months in dusty, greasy or pet-heavy homes — Dust and pet hair restrict heat rejection, making the compressor and condenser fan run hotter and longer. Some newer designs are sealed or service-only, so the model manual controls.
Keep the door gasket clean and confirm it seals evenly all the way around.
Wipe monthly; inspect whenever condensation or frost appears — A dirty, folded or loose gasket leaks warm humid air into the cabinet. That drives longer run times and can create frost or condensation that looks like a cooling-system failure.
Replace the refrigerator water filter on schedule if the machine has one.
Every 6 months, at the indicator, or sooner if flow drops — A loaded filter restricts water flow. That can produce slow dispensing, undersized ice and low ice production without any failed valve or ice maker.
Verify cabinet temperature and leave room for internal and external airflow.
Check monthly and after major loading changes — A refrigerator cannot stabilize temperature when vents are buried or the cabinet is packed solid. A thermometer catches a slow cooling decline before food loss or a complete no-cool event.
Habits like these tend to extend the useful life of the appliance. They are not a guarantee against failure.
Kenmore's service story is clearer than people expect: Sears Home Services still runs a national repair operation that knows these machines, and parts stay easy through the same channels as whoever built yours.
Kenmore repair runs through Sears Home Services — still a real, operating national fleet, booked online, by phone, or chat. Out of warranty there's a second path: the model number's prefix tells you who actually built your machine (Whirlpool, LG, Frigidaire, Bosch), and any tech who knows that builder can service it with the right parts.
Repair Economics
Most-Common Repair
$125–$450
Defrost System
Common Repair
Typical Range
Defrost System
$125–$450
Fan Motor
$150–$400
Ice Maker / Water Inlet Valve
$125–$650
Defrost Drain (Clogged)
$125–$300
Compressor Start Relay
$125–$300
Thermostat / Thermistor
$125–$400
Door Gasket
$100–$300
Condenser Fan Motor
$150–$350
Main Control Board
$225–$800
Compressor / Sealed System
$600–$1,500
Parts Availability
Parts Availability
Plentiful
Exact-model catalogs at PartSelect and AppliancePartsPros resolve for 106.72152110; functional parts can be bought through independent DIY/servicer distributors.
This platform is generally approachable for a confident DIYer. The repairs owners face most often here — Defrost System, Fan Motor and Ice Maker / Water Inlet Valve — can typically be handled with basic tools and patience. The jobs that go deeper — sealed-system and compressor work — belong to a licensed technician; that work requires EPA certification and recovery equipment, and there is no homeowner path for it.
This page draws on the ApplianceEdge Registry — 2,640 appliance families connected to more than 18,200 verified models, independently researched. We don’t know everything about this family yet, and we won’t pretend to: finish records and filter and accessory cross-references for this platform are still being verified. We only publish what we can stand behind, and the gaps close as the Registry grows.
ApplianceEdge assessments — lifespans, repair values, and reliability notes — are our editorial opinions, built from documented third-party sources: owner reports, industry pricing data, manufacturer literature, and official records. They describe patterns across a product family, not any individual machine; your experience may differ. Recall information links directly to official CPSC notices. We accept no payment from manufacturers, and no brand influences what we publish.
ApplianceEdge is not currently compensated for referrals made through links on this site. Links to products, retailers, and service providers are provided for convenience only. Our recommendations are based on ownership experience, reliability considerations, serviceability, and household fit—not compensation. No manufacturer or retailer pays for placement or favorable coverage.
