MGR is a Maytag gas range family. The badge spans older independent-Maytag and later Whirlpool-family eras, so the complete model and sales period matter. Gas format first; width, slide-in/pro chassis, oven configuration, and controls define the family.
These model numbers have been verified as belonging to the MGR family. Small variations exist inside a family — your exact model is what ties recalls, known issues and repair guidance to your machine.
Living with a MGR is flame you can see and control — and a little burner housekeeping as the price of admission. Day to day, clean ports, dry igniters, occasional grate scrub — the small rituals that keep the fire instant. When something does wear out, parts are easy to find and most independent techs can do the work. Our data puts the ApplianceEdge Expected Lifespan at 16 years for this family. Treat that as the planning baseline, not the ceiling — well-maintained units regularly run past it.
ApplianceEdgeExpected Lifespan
16 yrsOur estimate for this family with normal use and basic care.
The ApplianceEdge Expected Lifespan is our editorial opinion, drawn from ownership patterns and market data. It is not a warranty, a prediction for your unit, or a substitute for an assessment of your machine’s actual condition.
Recall Information
No recalls on our record for this family. We watch official CPSC recall notices continuously to keep you protected — if anything ever changes, it will show up here.
Warranty Coverage
10-year limited parts — cooking
Covered post-2017 cooking products include specified burners/elements, ceramic tops or grates, bake/broil components and cavities.
Coverage varies by year and region. Confirm yours with Maytag against your exact model to be sure.
Recurring Issues to Watch For
No documented programs or service records are on file for this platform. These are common wear points for the category.
Igniter
Oven won’t heat, or preheats very slowly
Spark Electrode
A burner clicks but won’t light
Oven Temperature Sensor
Oven runs too hot, too cold, or uneven
Spark Ignition Switch / Spark Module
Burners keep clicking, or none spark
Control Board
Dead panel, error codes, or oven won’t run
Broil Igniter
Broiler won’t heat
Burner Head / Cap
Flame is weak, uneven, or yellow
Oven Door Hinge Assembly
Oven door won’t close evenly or drops open
Gas Valve
Gas smell when off, or flame won’t shut off
Oven Door Latch Assembly
Door stuck locked, or self-clean won’t start
Maintenance Habits
Clean burner heads and ports with nonabrasive tools, then dry every part completely.
After spillovers and during monthly deep cleaning — Food and moisture in the flame ports cause delayed ignition, clicking and uneven flames. Keeping the ports open prevents many apparent igniter failures.
Keep oven vents clear and remove heavy cavity spills once the oven cools.
Inspect every use; spot-clean after significant spills — Grease and blocked vents trap heat around controls and create smoke. Routine spot cleaning is gentler on enamel and seals than letting deposits bake through many cycles.
Remove racks and accessories before self-clean unless the manual explicitly says they can stay.
Every self-clean cycle — High self-clean temperatures can seize rack glides, discolor metal and add avoidable heat load to the cavity and door-lock system.
Seat each burner cap on the correct burner before lighting.
After every burner cleaning — A shifted or mismatched cap disrupts the gas-air path and makes the spark jump in the wrong place, producing delayed or failed ignition.
Habits like these tend to extend the useful life of the appliance. They are not a guarantee against failure.
Maytag ownership is built on durability and Whirlpool's repair world: parts everywhere, any tech can fix one, W Service's 2,300-company network behind it, and 10-year limited parts coverage on key components across much of the current line.
Maytag runs on Whirlpool's service system: book warranty work through the W Service portal or phone and a local certified tech gets dispatched. Once the warranty's done, any competent independent can take over — parts are everywhere and the machines are widely understood.
Repair Economics
Most-Common Repair
$150–$350
Igniter
Common Repair
Typical Range
Igniter
$150–$350
Spark Electrode
$125–$300
Oven Temperature Sensor
$100–$250
Spark Ignition Switch / Spark Module
$150–$350
Control Board
$200–$750
Broil Igniter
$150–$350
Burner Head / Cap
$100–$300
Oven Door Hinge Assembly
$175–$500
Gas Valve
$200–$600
Oven Door Latch Assembly
$150–$350
Parts Availability
Parts Availability
Plentiful
Exact-model catalogs at PartSelect and AppliancePartsPros resolve for MGR6600FB; functional parts can be bought through independent DIY/servicer distributors.
This platform is generally approachable for a confident DIYer. The repairs owners face most often here — Igniter, Spark Electrode and Oven Temperature Sensor — can typically be handled with basic tools and patience. Gas-line and burner work is outside the DIY envelope regardless of skill level.
This page draws on the ApplianceEdge Registry — 2,640 appliance families connected to more than 18,200 verified models, independently researched. We don’t know everything about this family yet, and we won’t pretend to: finish records and filter and accessory cross-references for this platform are still being verified. We only publish what we can stand behind, and the gaps close as the Registry grows.
ApplianceEdge assessments — lifespans, repair values, and reliability notes — are our editorial opinions, built from documented third-party sources: owner reports, industry pricing data, manufacturer literature, and official records. They describe patterns across a product family, not any individual machine; your experience may differ. Recall information links directly to official CPSC notices. We accept no payment from manufacturers, and no brand influences what we publish.
ApplianceEdge is not currently compensated for referrals made through links on this site. Links to products, retailers, and service providers are provided for convenience only. Our recommendations are based on ownership experience, reliability considerations, serviceability, and household fit—not compensation. No manufacturer or retailer pays for placement or favorable coverage.
