MZD is a Maytag side-by-side refrigerator family sold roughly 1999-2008 — a 36-inch cabinet in the 25-to-26-cubic-foot class with full-height doors, from Maytag's independent era. Ice and water through the freezer door, adjustable glass shelves, and humidity-controlled crispers. The suffix letters mostly track finish and trim; age is now the bigger story on any repair call.
1MZD2752GRW — also sold as MZD2752GRW-SIDE-BY-SIDE
These model numbers have been verified as belonging to the MZD family. Small variations exist inside a family — your exact model is what ties recalls, known issues and repair guidance to your machine.
Living with a MZD means two skinny columns you get to know well — the layout asks you to think in vertical space, and the through-door ice repays it. Ice and water through the freezer door, adjustable glass shelves, and humidity-controlled crispers. The suffix letters mostly track finish and trim; age is now the bigger story on any repair call. Day to day, swap the filter when it's due and clean the coils once in a while — and know that when age arrives, it usually knocks at the dispenser first. When age catches up, parts are simple to source and you won't struggle to find someone to fit them. Our data puts the ApplianceEdge Expected Lifespan at 12 years for this family. Treat that as the planning baseline, not the ceiling — well-maintained units regularly run past it.
ApplianceEdgeExpected Lifespan
12 yrsOur estimate for this family with normal use and basic care.
The ApplianceEdge Expected Lifespan is our editorial opinion, drawn from ownership patterns and market data. It is not a warranty, a prediction for your unit, or a substitute for an assessment of your machine’s actual condition.
Recall Information2
Product defect can overheat and cause fire — 2009
A recall was issued covering Product defect can overheat and cause fire. Check your model and serial number against the official notice.
Coverage varies by year and region. Confirm yours with Maytag against your exact model to be sure.
Recurring Issues to Watch For
No documented programs or service records are on file for this platform. These are common wear points for the category.
Dispenser Switch / Auger Motor
Ice or water dispenser doesn’t work
Ice Maker
Ice maker stopped making ice
Water Inlet Valve
No water at dispenser, or small hollow ice
Evaporator Fan Motor
Freezer cold but fridge side warm, or fan noise
Defrost System
Frost on freezer back wall, or fridge warms up
Main Control Board
Intermittent cooling, dead display, or error codes
Thermostat
Fridge side freezes food, or swings warm and cold
Condenser Fan Motor
Runs constantly, runs hot, or rattles in back
Door Gasket
Door won’t seal, or condensation at the opening
Compressor
Fridge and freezer warm — runs but doesn’t cool
Maintenance Habits
Clean the condenser area only when the owner manual identifies it as user-accessible.
Inspect yearly; clean every 3–6 months in dusty, greasy or pet-heavy homes — Dust and pet hair restrict heat rejection, making the compressor and condenser fan run hotter and longer. Some newer designs are sealed or service-only, so the model manual controls.
Keep the door gasket clean and confirm it seals evenly all the way around.
Wipe monthly; inspect whenever condensation or frost appears — A dirty, folded or loose gasket leaks warm humid air into the cabinet. That drives longer run times and can create frost or condensation that looks like a cooling-system failure.
Replace the refrigerator water filter on schedule if the machine has one.
Every 6 months, at the indicator, or sooner if flow drops — A loaded filter restricts water flow. That can produce slow dispensing, undersized ice and low ice production without any failed valve or ice maker.
Verify cabinet temperature and leave room for internal and external airflow.
Check monthly and after major loading changes — A refrigerator cannot stabilize temperature when vents are buried or the cabinet is packed solid. A thermometer catches a slow cooling decline before food loss or a complete no-cool event.
Habits like these tend to extend the useful life of the appliance. They are not a guarantee against failure.
Maytag ownership is built on durability and Whirlpool's repair world: parts everywhere, any tech can fix one, W Service's 2,300-company network behind it, and 10-year limited parts coverage on key components across much of the current line.
Maytag runs on Whirlpool's service system: book warranty work through the W Service portal or phone and a local certified tech gets dispatched. Once the warranty's done, any competent independent can take over — parts are everywhere and the machines are widely understood.
Repair Economics
Most-Common Repair
$100–$350
Dispenser Switch / Auger Motor
Common Repair
Typical Range
Dispenser Switch / Auger Motor
$100–$350
Ice Maker
$150–$600
Water Inlet Valve
$100–$300
Evaporator Fan Motor
$150–$400
Defrost System
$125–$450
Main Control Board
$225–$800
Thermostat
$125–$350
Condenser Fan Motor
$150–$350
Door Gasket
$100–$300
Compressor
$600–$1,500
Parts Availability
Parts Availability
Plentiful
Independent catalogs at maytagreplacementparts.com and searspartsdirect.com both list functional parts tied to exact model MZD2666KES; ordinary distributor purchasing is available.
This platform is generally approachable for a confident DIYer. The repairs owners face most often here — Dispenser Switch / Auger Motor, Ice Maker and Water Inlet Valve — can typically be handled with basic tools and patience. The jobs that go deeper — sealed-system and compressor work — belong to a licensed technician; that work requires EPA certification and recovery equipment, and there is no homeowner path for it.
This page draws on the ApplianceEdge Registry — 2,640 appliance families connected to more than 18,200 verified models, independently researched. We don’t know everything about this family yet, and we won’t pretend to: finish records and filter and accessory cross-references for this platform are still being verified. We only publish what we can stand behind, and the gaps close as the Registry grows.
ApplianceEdge assessments — lifespans, repair values, and reliability notes — are our editorial opinions, built from documented third-party sources: owner reports, industry pricing data, manufacturer literature, and official records. They describe patterns across a product family, not any individual machine; your experience may differ. Recall information links directly to official CPSC notices. We accept no payment from manufacturers, and no brand influences what we publish.
ApplianceEdge is not currently compensated for referrals made through links on this site. Links to products, retailers, and service providers are provided for convenience only. Our recommendations are based on ownership experience, reliability considerations, serviceability, and household fit—not compensation. No manufacturer or retailer pays for placement or favorable coverage.
